diff --git a/doc/latex/TOP/main/chapters.tex b/doc/latex/TOP/main/chapters.tex
index b6ff358108932b7727ef55f0c11a12750cd16b71..75607ed6560bdd0325c0ec2177950e6a9463be20 100644
--- a/doc/latex/TOP/main/chapters.tex
+++ b/doc/latex/TOP/main/chapters.tex
@@ -1,4 +1,3 @@
\subfile{../subfiles/model_structure}
\subfile{../subfiles/model_description}
\subfile{../subfiles/model_setup}
-\subfile{../subfiles/miscellaneous}
diff --git a/doc/latex/TOP/subfiles/miscellaneous.tex b/doc/latex/TOP/subfiles/miscellaneous.tex
deleted file mode 100644
index 0f9d4973dc2ce48b5bc6417a553f2aed78498a96..0000000000000000000000000000000000000000
--- a/doc/latex/TOP/subfiles/miscellaneous.tex
+++ /dev/null
@@ -1,170 +0,0 @@
-\documentclass[../main/TOP_manual]{subfiles}
-
-\begin{document}
-
-\chapter{Miscellaneous}
-
-\section{TOP synthetic Workflow}
-
-A synthetic description of the TOP interface workflow is given below to summarize the steps involved in the computation of biogeochemical and physical trends and their time integration and outputs, by reporting also the principal Fortran subroutine herein involved.
-
-%\begin{figure}[!h]
-% \centering
-% \includegraphics[width=0.80\textwidth]{Top_FlowChart}
-% \caption{Schematic view of NEMO-TOP flowchart}
-% \label{img_cfcatm}
-%\end{figure}
-
-\begin{minted}{bash}
-nemogcm
- !
- nemo_ini ! NEMO General Initialisations
- !
- trc_ini ! TOP Initialisations
- !
- stp() ! NEMO Time-stepping
- !
- trc_stp() ! TOP time-stepping
- !
- trc_wri() ! I/O manager : Output of passive tracers
- trc_sms() ! Sinks and sources program manager
- trc_trp() ! Transport of passive tracers
- trc_rst_wri() ! Write tracer restart file
- trd_mxl_trc() ! trends: Mixed-layer
-\end{minted}
-
-\subsection{Model initialization (./src/TOP/trcini.F90)}
-
-This module consists on inital set up of passive tracers variables and parameters : read the namelist, set initial tracer fields (either read restart or read data or analytical formulation and specific initailisation in each SMS module ( analytical initialisation of tracers or constant values )
-
-\begin{minted}{bash}
-trc_init ! TOP Initialisations
- !
- IF( PISCES ) trc_ini_pisces() ! PISCES bio model
- IF( MY_TRC) trc_ini_my_trc() ! MY_TRC model
- IF( CFCs ) trc_ini_cfc () ! CFCs
- IF( C14 ) trc_ini_c14 () ! C14 model
- IF( AGE ) trc_ini_age () ! AGE tracer
- !
- IF( REST ) trc_rst_read() ! Restart from a file
- ELSE trc_dta() ! Initialisation from data
-\end{minted}
-
-\subsection{BGC trends computation (./src/TOP/trcsms.F90)}
-
-This is the main module where the passive tracers source minus sinks of each TOP sub-module is managed.
-
-\begin{minted}{bash}
-trc_sms() ! Sinks and sources prooram manager
- !
- IF( PISCES ) trc_sms_pisces() ! main program of PISCES
- IF( CFCs ) trc_sms_cfc() ! surface fluxes of CFC
- IF( C14 ) trc_sms_c14() ! surface fluxes of C14
- IF( AGE ) trc_sms_age() ! Age tracer
- IF( MY_TRC) trc_sms_my_trc() ! MY_TRC tracers
-\end{minted}
-
-\subsection{Physical trends computation (./src/TOP/TRP/trctrp.F90)}
-
-This is the main module where the passive tracers transport is managed. All the physical trends is calculated ( advective \& diffusive trends, surface BC from freshwater or external inputs )
-
-\begin{minted}{bash}
-trc_trp() ! Transport of passive tracers
- !
- trc_sbc() ! Surface boundary condition of freshwater flux
- trc_bc() ! Surface and lateral Boundary Conditions
- trc_ais() ! Tracers from Antarctic Ice Sheet (icb, isf)
- trc_bbl() ! Advective (and/or diffusive) bottom boundary layer scheme
- trc_dmp() ! Internal damping trends
- trc_bdy() ! BDY damping trends
- trc_adv() ! Horizontal & Vertical advection
- trc_ldf() ! Lateral mixing
- trc_zdf() ! Vert. mixing & after tracer
- trc_atf() ! Time filtering of "now" tracer fields
- trc_rad() ! Correct artificial negative concentrations
-\end{minted}
-
-\subsection{Outputs (./src/TOP/TRP/trcwri.F90)}
-
-This is the main module where the passive tracer outputs of each TOP sub-module is managed using the I/O library XIOS.
-
-\begin{minted}{bash}
-trc_wri() ! I/O manager : Output of passive tracers
-!
-IF( PISCES ) trc_wri_pisces() ! Output of PISCES diagnostics
-IF( CFCs ) trc_wri_cfc() ! Output of Cfcs diagnostics
-IF( C14 ) trc_wri_c14() ! surface fluxes of C14
-IF( AGE ) trc_wri_age() ! Age tracer
-IF( MY_TRC ) trc_wri_my_trc() ! MY_TRC tracers
-\end{minted}
-
-\section{Coupling an external BGC model using NEMO framework}
-
-The coupling with an external BGC model through the NEMO compilation framework can be achieved in different ways according to the degree of coding complexity of the Biogeochemical model, like e.g., the whole code is made only by one file or it has multiple modules and interfaces spread across several subfolders.\\ \\
-Beside the 6 core files of MY\_TRC module, see (see \label{Mytrc}, let's assume an external BGC model named \textit{"MYBGC"} and constituted by a rather essential coding structure, likely few Fortran files. The new coupled configuration name is NEMO\_MYBGC. \\ \\
-The best solution is to have all files (the modified MY\_TRC routines and the BGC model ones) placed in a unique folder with root \path{<MYBGCPATH>} and to use the \textit{makenemo} external readdressing of MY\_SRC folder. \\ \\
-Before compiling the code it is necessary to create the new configuration folder
-
-\begin{minted}{bash}
- $[nemo-code-root]> mkdir cfgs/NEMO_MYBGC
-\end{minted}
-
-and add in it the configuration file cpp\_MYBGC.fcm whose content will be
-
-\begin{minted}{bash}
- bld::tool::fppkeys key_xios key_top
-\end{minted}
-
-The compilation with \textit{makenemo} will be executed through the following syntax, by including OCE and TOP components
-
-\begin{minted}{bash}
- $[nemo-code-root]> ./makenemo -r GYRE_PISCES -n NEMO_MYBGC -d "OCE TOP" -m <arch_my_machine> -j 8 -e <MYBGCPATH>
-\end{minted}
-
-The makenemo feature \textit{-e} was introduced to readdress at compilation time the standard MY\_SRC folder (usually found in NEMO configurations) with a user defined external one.
-After the compilation, the coupled configuration will be listed in \textbf{work\_cfg.txt} and it will look like
-
-\begin{minted}{bash}
- NEMO_MYBGC OCE TOP
-\end{minted}
-
-The compilation of more articulated BGC model code \& infrastructure, like in the case of BFM \citep{bfm_nemo_coupling}, requires some additional features. \\
-
-As before, let's assume a coupled configuration name NEMO\_MYBGC, but in this case MYBGC model root becomes <MYBGCPATH> that contains 4 different subfolders for biogeochemistry, named initialization, pelagic, and benthic, and a separate one named nemo\_coupling including the modified MY\_SRC routines. The latter folder containing the modified NEMO coupling interface will be still linked using the makenemo \textit{-e} option. \\
-
-In order to include the BGC model subfolders in the compilation of NEMO code, it will be necessary to extend the configuration \textit{cpp\_NEMO\_MYBGC.fcm} file to include the specific paths of MYBGC folders, as in the following example
-
-\begin{minted}{bash}
- bld::tool::fppkeys key_xios key_top
-
- src::MYBGC::initialization <MYBGCPATH>/initialization
- src::MYBGC::pelagic <MYBGCPATH>/pelagic
- src::MYBGC::benthic <MYBGCPATH>/benthic
-
- bld::pp::MYBGC 1
- bld::tool::fppflags::MYBGC \%FPPFLAGS
- bld::tool::fppkeys \%bld::tool::fppkeys MYBGC_MACROS
-\end{minted}
-
-where MYBGC\_MACROS is the space delimited list of macros used in MYBGC model for selecting/excluding specific parts of the code. The BGC model code will be preprocessed in the configuration BLD folder as for NEMO, but with an independent path, like NEMO\_MYBGC/BLD/MYBGC/<subfolders>.\\
-
-The compilation will be performed similarly to in the previous case with the following
-
-\begin{minted}{bash}
-makenemo -r NEMO_MYBGC -m <arch_my_machine> -j 8 -e <MYBGCPATH>/nemo_coupling
-\end{minted}
-
-Note that, the additional lines specific for the BGC model source and build paths, can be written into a separate file, e.g. named MYBGC.fcm, and then simply included in the cpp\_NEMO\_MYBGC.fcm as follow:
-
-\begin{minted}{bash}
-bld::tool::fppkeys key_zdftke key_dynspg_ts key_xios key_top
-inc <MYBGCPATH>/MYBGC.fcm
-\end{minted}
-
-This will enable a more portable compilation structure for all MYBGC related configurations.
-
-Important: the coupling interface contained in nemo\_coupling cannot be added using the FCM syntax, as the same files already exists in NEMO and they are overridden only with the readdressing of MY\_SRC contents to avoid compilation conflicts due to duplicate routines.
-
-All modifications illustrated above, can be easily implemented using shell or python scripting to edit the NEMO configuration cpp.fcm file and to create the BGC model specific FCM compilation file with code paths.
-
-\end{document}